CategoriesHow To

How To Remove Rust From Bikes At Home

Your once-new or brand-new bike has started to show signs of wear and tear as the years pass. When rust appears on numerous bike components, it’s logical for a bike owner to be concerned.

This is naturally expected to occur especially if the bike is used regularly outside and is continually exposed to environmental variables such as water, sunlight, or air. Bikes are made out of metal, and metal will rust when it’s exposed to water or moisture.

Although rust is often seen as a sign of ageing, it can also be stripped off and renewed to give the surface a new life. There are several ways to remove rust from bikes. What should a bike owner do, then, to get rid of rust and keep it from spreading?

Learning how to remove rust from a bicycle is a simple remedy. After all, this is a skill that must be honed as part of your overall bicycle maintenance.

Cleaning Bikes With Baking Soda

With this method, add baking soda and water in a bowl and add 50/50 mixture of the baking soda and water and stir until a thick paste forms. You’ll need enough paste to cover the rust entirely, so have the bowl, baking soda and water on standby in case you need to create more.

remove rust baking soda

Whenever it comes to minor rust removal, baking soda is usually very effective. Other approaches may work better for severe rusting. For better removal capabilities, add a dash of lemon juice to the paste.

Apply the paste to the rusted areas of the bike with a brush or sponge. Allow time for the paste to settle (like 10 t0 15 minutes) and break down the rust before scrubbing or removing it. If you’re dealing with a lot of rust, you’ll probably need to soak for longer.

Let the paste settle for one hour if that’s the case. After then, keep an eye on your progress. The baking soda paste should be thick enough to cover the rust area evenly without dripping onto the bike.

Using a scrub pad, scrape off the baking soda. Wipe off the baking soda solution with a cloth. You should notice the rust breaking down and detaching from the bike as you scrub. If you dont have a scrub pad, use a toothbrush substitute.

Removing Bike Rust With Vinegar

White vinegar is a well-known rust remover and you may use it on your rusted parts of your bike. All you have to do is to pour the white vinegar into a spray bottle and spray generously on the affected areas. You have the option of applying the vinegar straight to the surface, but spraying using a spray bottle allows you to disperse it evenly.

remove rust vinegar bike

Rinse off the vinegar off the surface after 15 minutes. You should see the rust peel off. Rinsing the surface with water will stop the vinegar from corroding it. For minor components, soak all of the bike’s little parts in vinegar to eliminate all of the rust.

Rust can resurface if moisture is left on the bike. To remove extra moisture, wipe your bike down with a towel soaked in denatured alcohol. To avoid rusting, keep your bike in a cool, dry location.

Removing Bike Rust With Lemon Juice

Did you know that you can use lemon juice to remove rust from your bike? For this combine borax and lemon juice until a paste is formed. Apply the paste to the rust with a clean rag and let it sit for at least 30 minutes (longer if the parts are rustier.

lemon juice remove rust bike

If the paste begins to dry out, simply spritz it with water to re-wet it. Scrub the paste into the rusted parts of the bike with a brush (a toothbrush works well). Scrubbing should remove the rust quickly. If any rust remains, repeat the procedure. Thoroughly clean and dry your bike before storing or using it.

Removing Bike Rust With Steel Wool

Steel wool can also be used to eliminate rust from a bike’s chrome surfaces and other components of the bike. The neatest thing about steel wool is that it is readily available and inexpensive.

All you have to do is gently scrub the corroded surface with the wool to see how effective it is. Steel wool can also peel off any oxidation that is growing on the surface in addition to eliminating the rust. You can also use it to polish your bike’s chrome. Extra-fine steel wool should be used to clean and remove rust from small components.

Removing Bike Rust With Citric Acid

Citric acid is another chemical that you can use to remove rust from your bike frame, handlebars and other parts of the bike.

citric acid remove rust bike

The following concentration of citric acid is quite safe; it only adds a bit more punch than regular household vinegar. Carefully put powdered citric acid into your bucket and use around 1/3 cup powdered citric acid per gallon of water, but depending on how rusted your bike is and how quickly you need results, you can use somewhat more or less.

Fill your bucket halfway with boiling water and whisk to completely dissolve the citric acid powder. At the bottom of the bucket, there should be no grit.

Fill in the solution in a spray bottle to spray on the rusted areas or immerse a cloth in the solution and use it to go over the rusted surfaces.As the acid reacts with the rust and forms tiny gas bubbles, bubbles will appear on the object’s surface within 10-15 minutes. You’ll know the solution is working when bubbles come to the surface.

You can scrub the affected surface to speed up the process of rust removal. Allow the scrubbed areas to dry once you’re satisfied that the rust has been removed. In the process of cleaning the metal, it may appear “dirty” and leave dark impressions on your hands; this is normal. Wipe the bike to finish off the cleaning process

Oxalic Acid

Rust can also be removed using oxalic acid. Because this is a strong chemical agent, make sure you’ve taken precautions before using it. Ensure you’re using protective gear, such as goggles and rubber gloves, and that you’re not inhaling the corrosive vapors.

Make a diluted solution of oxalic acid and water (25ml acid and 250ml water). Pour the solution in a spray bottle and spray on the rusted parts of the bike. Let the solution be on the surface for about 20 minutes and then wipe it down with a brass brush or cloth.

Once the rust has been removed, wipe the bike with a wet cloth before drying it.

Removing Rust With WD-40®

There is a product you can buy on Amazon called WD-40 (click here) that you can use to remove rust. Because it is so simple and quick, using WD-40 for rust removal is one of the best rust treatments. Scrub the item with a clean wire brush after spraying it with WD-40®.

wd40 remove rust bike

To guarantee that this rust removal process does not damage your metal, test a small area first. WD-40® can be used to clean metal bike chains, bike frames, spokes and other variety of things in your home such as furniture.

Apply WD-40® to safeguard your bike by getting rid of rust and prevent it from returning. WD-40 Specialist Penetrant is designed to penetrate rust and dirt, making rust removal easier.

How To Rust Proof Your Bike

Most steel frames rust, especially if you live near a beach or where it will be exposed to salt or water for extended periods of time. On the market, there are a number of products that you can use to prevent rust from forming on your bicycle.

This is a silicone-based polish called BIKE LUST, which you can use to polish your bike with (get it here on Amazon). It will build a silicone coating on top of the paint, which should prevent rust from forming. Apply liberally on your bike.

The most simplest approach would be to spray it on a clean towel and massage it on all the exposed areas of your bike. It will not prevent rust, but it will keep it from forming. It will also give your bike a wonderful gloss and shine while also preventing rust.

Another problem is the formation of rust on the inside of the bike’s tubes. There is a product called Frame Saver (get it here on Amazon) that is an aerosol that you spray into the inside of your bike through the seat tube or any of the little vent holes around the frame.

It forms a coating on the inside of the metal, preventing rust from forming and corroding your frame from the inside.

It’s better to spray this on a new frame before it rusts. So, if you’re buying a steel bike, you should definitely use this product on it before riding it in the rain.

Aside from the frame, lubricating the gears and chain will also assist to keep rust at bay. To clean your chain and keep it running smoothly, try using a BIO bike chain degreaser (Amazon link) and bike chain lubrication spray (Amazon link).

Is It OK to keep A Bike Outside?

When your bike is too hot, too cold, rained on, or all of the above, it can cause a variety of problems. Rain is your bicycle’s greatest adversary. Rust and corrosion can be caused by rain, and this type of damage is necessary to replace.

If you reside in a humid or wet location, leaving your bike outside may cause it to rust quicker than if you kept it inside. Rain can corrode the chain and cause bearings and bolts to break down. Not to forget that a bike left in the rain will lose its factory finish quickly.

Can I Clean My Bike With Water?

Water can be a useful tool when used correctly, but use caution here. Water, especially when it comes from a high-pressure hose, can harm your bike’s sensitive bearing systems.

Will Bikes Rust in A Shed?

As long as you take care of your bike and keep it properly, it will not rust in the shed! Covering it up and maintaining your bicycle are significant considerations in how long your bike will last in the shed. The moisture in your location will be a major worry!

If you dwell in a high-humidity region, your bike will most probably be covered in condensation if left in the shed. Condensation builds on the surface of your bike, causing it to rust.

Leave a Reply